LuxCoreRender Materials Mirror

From LuxCoreRender Wiki
Revision as of 21:06, 18 December 2017 by Piita (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Luxcore materials mirror.jpg


The Mirror material represents a perfectly specular mirror.

Options

Reflection Color

This is the color of the mirror. Adjusting it will control the apparent "brightness" of the "mirror world." A value of around .55-.65 is a good starting point.


Thin Film

This allows you to define a film coating on top. This usually results in a rainbow colored reflection. It has two controls, a depth and IOR. The IOR should match that of your film material (Cleaning solution, which can leave such a film behind, has an IOR of ~1.3-1.35, due to it being almost entirely water). You can vary the thickness to achieve the desired effect. A thickness of several hundred nm will result in the most pronounced effect.


Back to Materials